vj x8r www.vishay.com vishay vitramon revision: 26-aug-14 1 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount multilayer ceramic chip capacitors for high temperature applications features ? specialty: high temperature applications ? high operating tempe rature dielectric, ? up to +150 c ? maintains capacitance at high temperature for frequency stability ? wet build process ? reliable noble metal electrode (nme) system ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? high temperature modules electrical specifications note ? electrical characteristics at +25 c unless otherwise specified. ? operating temperature: -55 c to +150 c capacitance range: 330 pf to 220 nf voltage range: 25 v dc to 100 v dc temperature coefficient of capacitance (tcc): ? 15 % from -55 c to +150 c dissipation f actor (df): ? 25 v ratings: 3.5 % maximum at 1.0 v rms and 1 khz ? > 25 v ratings: 2.5 % maximum at 1.0 v rms and 1 khz aging rate: 1 % maximum per decade insulation resistance (ir): ? at +25 c and rated voltage 100 000 m ? minimum or 1000 ? f, whichever is less ? at +125 c and rated voltage 10 000 m ? minimum or 100 ? f, whichever is less dielectric strength test: ? performed per method 103 of eia-198-2-e ? applied test voltage: ? ? 100 v dc -rated: 250 % of rated voltage available
vj x8r www.vishay.com vishay vitramon revision: 26-aug-14 2 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? detail ratings see selection chart notes (1) dc voltage rating should not be exceede d in application. other application factors may affect the mlcc performance. ? consult for questions: mlcc@vishay.com (2) process code may be a dded with up to three digits, used to control no n-standard products and requirements. (3) termination code e for conductive epoxy assembly. (4) marking in referenc e to eia198, see www.vishay.com/doc?45028 (5) termination code f not available for 0402, 0603 - 100 v, 0805 - 100 v. quick reference data dielectric case maximum voltage (v) capacitance minimum maximum x8r 0402 100 330 pf 6.8 nf 0603 100 470 pf 33 nf 0805 100 470 pf 100 nf 1206 50 1.0 nf 220 nf 1210 50 10 nf 220 nf ordering information vj0805 h 102 k x a a c ### (2) case code dielectric capacitance nominal code capacitance tolerance termination dc voltage rating (1) marking (4) packaging process code 0402 0603 0805 1206 1210 h = x8r expressed in picofarads (pf). the first two digits are significant, the third is a multiplier. examples: 102 = 1000 pf j = 5 % k = 10 % m = 20 % x = ni barrier 100 % tin plated f, e = agpd (3)(5) x = 25 v a = 50 v b = 100 v a = unmarked m = marked note marking is only available for 0805 and 1206 with termination code x t = 7" reel / plastic tape c = 7" reel / paper tape r = 11 1/4" / 13" reel / plastic tape p = 11 1/4" / 13" reel / paper tape o = 7" reel / flamed paper tape i = 11 1/4" / 13" reel / flamed paper tape note i and o are used for f termination size 0603 / 0805 and e termination size 0402 / 0603 / 0805 environmental status termination code termination description rohs compliant vishay green x ni barrier 100 % tin plated matte finish yes yes eagpdyesyes fagpdyesno
vj x8r www.vishay.com vishay vitramon revision: 26-aug-14 3 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches (millimeters) case code style length (l) width (w) maximum thickness (t) termination (p) minimum maximum 0402 vj0402 0.040 + 0.004/- 0.002 (1.00 + 0.10/- 0.05) 0.020 + 0.004/- 0.002 (0.50 + 0.10/- 0.05) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 vj0603 0.063 0.006 (1.60 0.15) 0.031 0.006 (0.80 0.15) 0.036 (0.92) 0.012 (0.30) 0.018 (0.46) 0805 vj0805 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 vj1206 0.126 0.010 (3.20 0.25) 0.063 0.010 (1.60 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 vj1210 0.126 0.010 (3.20 0.25) 0.098 0.010 (2.50 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) l w t max. p
vj x8r www.vishay.com vishay vitramon revision: 26-aug-14 4 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) see soldering recommendations within this data book, or visit www.vishay. com/doc?45034 ? plastic tape, ?? paper tape rohs-compliant notes (1) reference: eia standard rs481 - taping of surface mount components for automatic placement (2) packaging c / p / o / i and t / r or lo wer quantities can depend from product thickness selection chart dielectric x8r style vj0402 vj0603 vj0805 vj1206 (1) vj1210 (1) case code 0402 0603 0805 1206 1210 voltage (v dc ) 25 50 100 25 50 100 25 50 100 25 50 25 50 voltage code x a b x a b x a b x a x a cap. code cap. 331 330 pf ?? ?? ?? 391 390 pf ?? ?? ?? 471 470 pf ?? ?? ?? ?? ?? ?? ?? ?? 561 560 pf ?? ?? ?? ?? ?? ?? ?? ?? 681 680 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? 821 820 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? 102 1.0 nf ?? ?? ?? ?? ?? ?? ?? ?? ?? ? ? 122 1.2 nf ?? ?? ?? ?? ?? ?? ?? ?? ?? ? ? 152 1.5 nf ?? ?? ?? ?? ?? ?? ?? ?? ? ? 182 1.8 nf ?? ?? ?? ?? ?? ?? ?? ?? ? ? 222 2.2 nf ?? ?? ?? ?? ?? ?? ?? ?? ? ? 272 2.7 nf ?? ?? ?? ?? ?? ?? ?? ? ? 332 3.3 nf ?? ?? ?? ?? ?? ?? ?? ? ? 392 3.9 nf ?? ?? ?? ?? ?? ?? ?? ? ? 472 4.7 nf ?? ?? ?? ?? ?? ?? ?? ? ? 562 5.6 nf ?? ?? ?? ?? ?? ?? ? ? 682 6.8 nf ?? ?? ?? ?? ?? ?? ? ? 822 8.2 nf ?? ?? ?? ?? ?? ? ? 103 10 nf ?? ?? ?? ?? ?? ? ? ? ? 123 12 nf ?? ?? ?? ?? ?? ? ? ? ? 153 15 nf ?? ?? ?? ?? ?? ? ? ? ? 183 18 nf ?? ?? ?? ?? ?? ? ? ? ? 223 22 nf ?? ?? ?? ? ? ? ? ? 273 27 nf ?? ?? ? ? ? ? ? ? 333 33 nf ?? ?? ? ? ? ? ? 393 39 nf ?? ? ? ? ? ? 473 47 nf ? ? ? ? ? ? 563 56 nf ? ? ? ? ? ? 683 68 nf ? ? ? ? ? 823 82 nf ? ? ? ? ? 104 100 nf ? ? ? ? ? 124 120 nf ? ? ? ? 154 150 nf ? ? ? 184 180 nf ? ? 224 220 nf ? ? 274 270 nf 334 330 nf 394 390 nf x8r packaging quantities (1) case code tape size 7" reel quantities 11 1/4" and 13" reel quantities packaging code packaging code c / o t p / i r 0402 8 mm 5000 n/a 10 000 n/a 0603 8 mm 4000 n/a 10 000 n/a 0805 (2) 8 mm 3000 3000 10 000 10 000 1206 (2) 8 mm n/a 2500 / 3000 10 000 9000 / 10 000 1210 (2) 8 mm n/a 2000 / 2500 / 3000 10 000 9000 / 10 000
vj x8r www.vishay.com vishay vitramon revision: 26-aug-14 5 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 storage and handling conditions (1) store the components at 5 c to 40 c ambient temperature and ? 70 % relative humidity conditions. (2) the product is recommended to be used within a time-fra me of 2 years after shipment. ? check solderability in case extended shelf life beyond the expiry date is needed. precautions: a. do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt or the like are present. this may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. store products on the shelf and av oid exposure to moisture or dust. c. do not expose products to excessive shoc k, vibration, direct sunlight and so on. x8r dielectric - typical parameters - 75 - 50 - 25 0 25 50 75 100 125 15 10 5 0 - 5 - 10 - 15 - 20 temperature c 150 175 temperature coefficient of capacitance % capacitance change a g in g rate hour s 1.0 0.0 - 1.0 - 2.0 % capacitance chan g e - 3 .0 - 4.0 1 10 100 1000 10 000 di ss ipation factor v s . volta g e di ss ipation factor dc volt s applied 0.025 0.02 3 0.021 0.019 0.017 0.015 0.01 3 0 10 20 3 0 40 50 - 75 - 50 - 25 0 25 50 75 100 125 0.0 di ss ipation factor v s . temperature temperature c % di ss ipation factor 0.5 1.0 1.5 2.0 2.5 3 .0 3 .5 4.0 4.5 5.0 x8r 150 175 volta g e coefficient of capacitance capacitance chan g e in % dc volt s applied 0.0 - 5.0 - 10.0 - 20.0 - 15.0 - 25.0 0 10 20 3 0 40 50 10 25 100 10 000 1000 100 10 in s ulation re s i s tance ( f) 150 in s ulation re s i s tance v s . temperature temperature c
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
